Another view of the dust collection frame. The goal is to seal
the bottom of the saw so a vacuum can be attached.
The vacuum attaches to the short length of 1-1/2" chrome tubing. (It's
a scrap of sink tailpiece. Never throw anything out. ;-) I had to add
a "set screw" (just its round head is visible in this picture) to help hold
the tube in place, since my hole saw drilled an oversize hole.
Another view of the dust collection frame. The goal is to seal the bottom of the saw so a vacuum can be attached.
The vacuum attaches to the short length of 1-1/2" chrome tubing. (It's a scrap of sink tailpiece. Never throw anything out. ;-) I had to add a "set screw" (just its round head is visible in this picture) to help hold the tube in place, since my hole saw drilled an oversize hole.